User Manual Q&AAnswer
Feb 24, 2025 - 06:16 AM
To install the Endorfy EY3A008 CPU Cooler on an AMD processor, please follow the steps below:
1. Before installation, make sure your computer is powered off and unplugged from the power source.
2. Remove any existing CPU cooler from your motherboard, if applicable.
3. Locate the CPU socket on your motherboard. It should be a square socket with numerous small holes.
4. Apply a small amount of thermal paste onto the center of the CPU. This helps with heat transfer between the CPU and the cooler.
5. Take the Endorfy EY3A008 CPU Cooler and align the mounting brackets with the holes around the CPU socket. Make sure the brackets are securely fastened.
6. Carefully place the CPU cooler onto the CPU, ensuring that the brackets align with the mounting holes on the cooler.
7. Gently press down on the cooler to secure it in place. You may need to use a bit of force, but be careful not to damage any components.
8. Once the cooler is securely installed, connect the fan cable to the CPU fan header on your motherboard.
9. Finally, double-check that all connections are secure and that the cooler is properly seated on the CPU.
10. You can now plug in your computer and power it on. Monitor the CPU temperature to ensure it is within safe operating limits.
For more detailed instructions and illustrations, please refer to the Endorfy EY3A008 CPU Cooler Instruction Manual available at endorfy.com/knowledge-base.
Remember to consult the manual for any specific instructions or precautions related to your particular motherboard or CPU model.
Add New Comment