How do I install the HILTI MT-B-GS EDB Grinder Baseplate? (HILTI MT-B-GS EDB Grinder Baseplate Instruction Manual)

Answer

manuals.plus

Feb 24, 2025 - 06:06 AM


To install the HILTI MT-B-GS EDB Grinder Baseplate, please follow the steps outlined in the instruction manual provided with the product. Here is a general overview of the installation process:

1. Ensure that the grinder is turned off and unplugged before starting the installation.

2. Remove any existing baseplate or accessories from the grinder, if applicable.

3. Align the holes on the baseplate with the corresponding holes on the grinder's body.

4. Insert the provided screws through the holes on the baseplate and into the grinder's body.

5. Use a suitable screwdriver or wrench to tighten the screws securely. Ensure that the baseplate is firmly attached to the grinder.

6. Once the baseplate is securely installed, you can attach any additional accessories or components as needed, following the instructions provided with those accessories.

It is important to note that the specific installation steps may vary depending on the model of the grinder and the baseplate you are using. Therefore, it is crucial to refer to the detailed installation instructions provided in the HILTI MT-B-GS EDB Grinder Baseplate Instruction Manual for accurate and model-specific guidance.

If you do not have the instruction manual, it is recommended to contact HILTI customer support or visit their official website to obtain a copy of the manual for your specific product model.