User Manual Q&AAnswer
Feb 24, 2025 - 06:03 AM
To connect the CAL2 to your computer, follow these steps:
1. Install the iQ-LED software on your computer before connecting the hardware.
2. Connect the power cord to the power supply on the back of the CAL2.
3. Connect the USB cable to the CAL2 and your PC.
4. Turn on the CAL2 using the power switch next to the power supply.
5. Connect the spectrometer to the PC using the USB cable. The system will install the spectrometer and iQ-LED drivers on your PC, which may take a few seconds.
6. You can check the installation in your hardware manager.
Please note that using an appropriate USB connection is essential for error-free operation of the CAL2. It is recommended to use the USB cables provided with the device. If you need to extend the USB connection to longer distances, please check if powered hubs/repeaters are necessary.
For more detailed instructions and troubleshooting, refer to the Image Engineering CAL2 Ultra Compact Camera Calibration Light Source User Manual.
Add New Comment