User Manual Q&AAnswer
Feb 24, 2025 - 06:02 AM
To connect the Image Engineering LE7 to your computer, follow these steps:
1. Install the iQ-LED software on your computer before connecting the hardware.
2. Connect the power cord to the power outlet on your LE7.
3. Connect the LE7 USB cable to your computer.
4. Turn on the LE7 using the power switch next to the power outlet.
5. Connect the USB cable from the spectrometer calibration device to your LE7.
The system will install the spectrometer and iQ-LED driver on your computer automatically. You can check the installation in your hardware manager.
Please refer to the "Connecting the hardware" section in the user manual for more detailed instructions and illustrations.
Add New Comment