User Manual Q&AAnswer
Feb 24, 2025 - 05:59 AM
To assemble and install the QAZQA 103108 Konge CL Black Oriental Ceiling Lamp, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before starting the installation, ensure that the electrical supply is switched off at the outset, preferably by means of a switch in the distribution box.
2. Take precaution while assembling the lamp as there may be some sharpness at some parts due to the fabrication system of these mesh lamps.
3. Make sure to study the instruction manual and the safety instructions carefully before proceeding with the installation.
4. The luminaires should only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
5. During maintenance, ensure that no moisture comes into contact with any areas of the terminal connections or voltage control parts.
6. Exterior lighting must not be installed during rain.
7. Take into account the minimal separation distance from other objects and the room required around the fitting.
8. If in doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
9. Adequately tighten clamping screws in electrical connections, especially with 12V low voltage conductors.
10. When replacing a halogen lamp, wait for it to cool for a minimum of 5 minutes.
11. Clean the lamp with a clean, dry cloth or brush, avoiding solvents or abrasives. Avoid dampness on all electrical components.
12. Take note of all available technical information provided.
13. When connecting wires, pay attention to the symbols: N = Neutral, L = Live, E = Earth.
14. The lamp is designed for indoor use only, where direct contact with water is impossible.
15. The lamp has a certain level of water-proof and dust-proof protection, indicated by the icon.
16. Check the protection class of the lamp: Class I means the fitting must be earthed, Class II means the fitting is double insulated and does not require earthing, and Class III means the fitting is low voltage.
17. Ensure that the type of lamp, maximum size, and wattage indicated in each lighting unit are not exceeded.
18. The lamp is designed to work only with the indicated voltage.
19. The luminaire can be used in combination with a dimmer if desired.
20. When disposing of the luminaire, it cannot be included with normal domestic waste. It should be brought to a staging area for electrical waste.
For any further questions or clarifications, please refer to the QAZQA 103108 Konge CL Black Oriental Ceiling Lamp instruction manual or contact QAZQA directly.
Add New Comment