User Manual Q&AAnswer
Feb 24, 2025 - 05:57 AM
To switch the door of the VISSANI HVUF11SLF 10.8 Cu Ft Refrigerator, follow these steps:
1. Start by removing the protective covers on the back side of the refrigerator using a flat-head screwdriver. Save the protective covers for future use.
2. Remove the 4 self-tapping screws that hold the door in place and save them.
3. Push the top hinge forward to release it, then remove the door and set it aside.
4. Pry off and remove the covers over the xxxx holes on the left side of the refrigerator housing. Attach the covers on the right side. These covers are force-fitted.
5. Push the refrigerator slightly backward against the wall.
6. Disassemble the 2 fixed stands and the bottom hinge.
7. Assemble the bottom hinge on the other side of the refrigerator and reassemble the stands.
8. Exchange the 2 bolts and attach them on the other side.
9. Exchange the stopper to the other side.
10. If needed, remove the handle by using an Allen wrench to loosen the fix xxxx . Twist out the connection xxxx and remove the xxxx hole plug.
11. Install the handle on the right side using the screws. Insert the xxxx hole plug into the left xxxx hole.
Please refer to the user manual for visual illustrations and additional details on door switching.
Add New Comment