User Manual Q&AAnswer
Feb 24, 2025 - 05:48 AM
To install the BroadLink SR4M Radar Motion Sensor, follow these steps:
1. Download and install the "Broadlink BLE" app from the App Store or Google Play by scanning the QR code or searching for it.
2. Open the app and create an account if desired, or skip this step.
3. Tap on "Add Device" and select "Sensor".
4. Press and hold the reset button on the sensor using a needle until the blue LED flashes quickly (pairing mode lasts for 20 seconds).
5. Click on "Add Devices" in the app to let it scan for the sensor to be paired.
6. The device will appear on the app, and the blue LED on the sensor will stop flashing.
Note: If the device does not appear, try resetting it and adding it again.
For more detailed instructions and information on using the sensor, please refer to the BroadLink SR4M Radar Motion Sensor User Manual.
Add New Comment