User Manual Q&AAnswer
Feb 24, 2025 - 05:47 AM
To connect the ENDORFY EY7A010 Supremo FM5 Gold 1000W Power Supply to your computer, follow these steps:
1. Ensure that your computer is powered off and unplugged from the power source.
2. Locate the power supply unit (PSU) in your computer case.
3. Connect the AC input cable to the PSU. The AC input cable should be plugged into a power outlet that supports the voltage and frequency specified in the manual (100-240 VAC, 13-6.5 A, 50-60 Hz).
4. Connect the DC output cables to the appropriate components in your computer. The PSU provides the following DC output voltages:
- +12V: This is the main power output for most components in your computer, such as the motherboard, CPU, and graphics card. Connect the appropriate cables to the corresponding connectors on these components.
- +3.3V and +5V: These voltages are used by various components in your computer, such as memory modules and peripheral devices. Connect the appropriate cables to the corresponding connectors on these components.
- -12V: This voltage is rarely used in modern computer systems. If you have any components that require -12V, connect the appropriate cable to the corresponding connector on the component.
- +5VSB: This voltage is used to power USB ports and other standby functions when the computer is in sleep mode or powered off. Connect the appropriate cable to the corresponding connector on the motherboard.
5. Ensure that all connections are secure and properly aligned. Avoid forcing any connections.
6. Once all connections are made, you can plug your computer back into the power source and power it on.
Please refer to the included cabling diagram in the manual for specific cable connections and configurations for your computer setup.
Add New Comment