User Manual Q&AAnswer
Feb 24, 2025 - 05:25 AM
To install the ENDORFY EY3A009 Fortis 5 Dual Fan CPU Cooler on your computer, please follow the steps below:
1. Ensure that your computer is powered off and unplugged from the power source.
2. Remove the existing CPU cooler (if any) by detaching it from the motherboard and carefully disconnecting any power cables or connectors.
3. Clean the surface of the CPU and remove any thermal paste residue using a lint-free cloth or alcohol wipes.
4. Place the backplate provided with the CPU cooler on the backside of the motherboard, aligning it with the mounting holes.
5. Insert the four mounting screws through the front side of the motherboard and secure them with the provided nuts on the backplate.
6. Apply a small amount of thermal paste onto the center of the CPU.
7. Carefully attach the CPU cooler onto the CPU, aligning the mounting brackets with the screws on the backplate.
8. Gently press down on the cooler to ensure it is securely attached.
9. Connect the CPU cooler's fan(s) to the appropriate fan headers on the motherboard. Refer to the manual for specific instructions on which headers to use.
10. Double-check all connections and ensure that the CPU cooler is properly seated.
11. Reassemble your computer, making sure all cables are properly connected.
12. Power on your computer and check the CPU temperatures to ensure the cooler is functioning correctly.
Please note that this is a general installation guide, and it is essential to refer to the specific instructions provided in the user manual for your ENDORFY EY3A009 Fortis 5 Dual Fan CPU Cooler for any additional details or specific requirements.
Add New Comment