Answer

Feb 24, 2025 - 05:09 AM
To connect the MiniMe DSP 8 subwoofer to your audio system, you can use the low-level RCA input. If your audio/video processor has a subwoofer output, you can connect it to the MiniMe DSP 8's low-level input using a "Y" RCA cable. This will allow the subwoofer to receive bass signals from the source. Make sure to set the crossover frequency at the maximum value for this connection. If you have two subwoofers and want to run them in stereo, you can connect the subwoofer outputs of your receiver to the low-level inputs of each MiniMe DSP 8 using separate "Y" RCA cables. If the subwoofers become out of phase with the main front speakers, you can flip the phase switches on the subwoofers to correct the problem.
Add New Comment