User Manual Q&AAnswer
Feb 24, 2025 - 05:02 AM
To connect the Altronix RB524 24 VDC Relay Module to your electrical system, follow these steps:
1. Ensure that the power source is turned off before making any connections.
2. Identify the power source and connect the positive (+) terminal of the power source to the positive (+) terminal of the RB524 module.
3. Connect the negative (-) terminal of the power source to the negative (-) terminal of the RB524 module.
4. Identify the load device (e.g., a motor, light, etc.) that you want to control using the RB524 module.
5. Connect one side of the load device to the common (COM) terminal of the RB524 module.
6. Connect the normally open (NO) terminal of the RB524 module to the other side of the load device.
7. Connect the normally closed (NC) terminal of the RB524 module to the other side of the load device if you want to use the polarity reversal latching feature.
8. Once all connections are made, double-check the wiring to ensure it is correct and secure.
9. Turn on the power source and test the RB524 module by activating the relay using the appropriate control signal.
Please refer to the Altronix RB524 24 VDC Relay Module User Manual for more detailed instructions, diagrams, and safety precautions.
Add New Comment