User Manual Q&AAnswer
Feb 24, 2025 - 04:55 AM
Cleaning the DJI AGRAS T40/T20P aircraft after pesticide spraying is important to maintain its performance and longevity. Here are the steps to clean the aircraft:
1. Fill the spray tank with clean water or soapy water and spray the water through the sprinklers until the tank is empty. Repeat this step two more times to ensure thorough cleaning.
2. Remove the spray tank strainer and sprinklers and clean them to clear any blockage. You can immerse them in clean water for 12 hours to ensure proper cleaning.
3. Clean the aircraft body by using a spray washer filled with water. Make sure to wipe the surface with a soft brush or wet cloth to remove any residue. Afterward, use a dry cloth to remove any remaining water.
4. If there is any dust or pesticide liquid on the motors, propellers, or heat sinks, wipe them with a wet cloth before cleaning the remaining water residue with a dry cloth.
5. Store the cleaned aircraft in a dry environment to prevent moisture damage.
By following these cleaning steps, you can ensure that your DJI AGRAS T40/T20P aircraft remains in good condition and ready for future use. For more detailed information and guidelines, please refer to the DJI AGRAS T40/T20P User Manual.
Add New Comment