User Manual Q&AAnswer
Feb 24, 2025 - 04:51 AM
To install the DIB 2293 Special Edition Advanced Bidet Toilet Seat, please follow the instructions provided in the instruction manual. Here is a summary of the installation process:
1. Ensure that you have a grounded 120V GFCI outlet available for connection.
2. Check the power cord for any damage or breakage before connecting it to the outlet.
3. It is recommended to use a dedicated circuit for the bidet seat to avoid tripping the breaker or flickering lights.
4. If you need to use an extension cord, make sure it is a three-pronged extension cord plugged into a proper GFCI outlet. The rating of the extension cord should be equal to or greater than the electrical rating of the unit (10 amp).
5. Connect the bidet seat to a potable cold water supply line.
6. Ensure that the area where you install the bidet seat has adequate ventilation to prevent damage to the electronic components.
7. Do not plug in the power cord until the plumbing work has been completed.
8. Keep the power cord away from heated surfaces and flammable materials to prevent fire hazards.
9. Do not touch the power cord with wet hands or reach for the product if it has fallen into water. Unplug immediately.
10. Unplug the bidet seat when cleaning or detaching it from the toilet bowl.
For more detailed instructions and illustrations, please refer to the "INSTALLATION" section of the instruction manual provided with the product.
Add New Comment