How do I use the LEZYNE Gravel Floor Driver Series pump to inflate my tires? (LEZYNE Gravel Floor Driver Series User Guide)

Answer

manuals.plus

Feb 24, 2025 - 04:32 AM

To use the LEZYNE Gravel Floor Driver Series pump, please follow these steps:

1. Prepare the pump: Ensure that the pump is securely placed on a stable surface. Make sure the hose is not tangled or twisted.

2. Connect the pump head: Identify the appropriate pump head for your valve type. The Gravel Floor Driver Series pumps come with two options: one for Presta valves and one for M6x0.8 valves (for seating tubeless tires). Choose the correct pump head and attach it to the pump hose securely.

3. Attach the pump head to the valve: Align the pump head with the valve on your tire. For Presta valves, unscrew the valve cap and press the pump head onto the valve until it is firmly attached. For M6x0.8 valves, ensure that the pump head is securely threaded onto the valve.

4. Begin pumping: Stand on the base of the pump to stabilize it. Use the handle to pump air into the tire. The digital drive pro model features a digital gauge that displays the current pressure, while the sport gravel floor drive model does not have a gauge. Continue pumping until you reach the desired tire pressure.

5. Disconnect the pump head: Once you have finished inflating the tire, carefully remove the pump head from the valve. For Presta valves, unscrew the pump head from the valve, and for M6x0.8 valves, carefully unthread the pump head.

6. Secure the valve: For Presta valves, xxxx the valve cap back onto the valve to prevent air leakage.

Please note that the LEZYNE Gravel Floor Driver Series pumps come with a CA PROP 65 warning, which indicates that the product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this warning, you can visit the website www.lezyne.com/prop65.

For any further assistance or detailed instructions, you can visit the Lezyne support page at www.lezyne.com/support.php or contact Lezyne USA directly at the following address: Lezyne USA, 645 Tank Farm Rd., Unit F, San Luis Obispo, California 93401.