User Manual Q&AAnswer
Feb 24, 2025 - 04:25 AM
To attach the VirtualFly TQ6/TQ6 Plus Flight Sim Throttle Quadrant to your desktop or home cockpit setup, you have two options.
Option A: Attaching from the back
1. Place the TQ6/TQ6 Plus on the surface where it will rest.
2. Unscrew the two rubber feet before setting up the clamp.
3. Use the included clamp and tighten the xxxx until you feel strong resistance.
4. Use the provided Allen screws and Allen key to secure the clamp to the surface.
Option B: Attaching from the bottom
1. Place the TQ6/TQ6 Plus on the surface where it will rest.
2. Unscrew the two rubber feet before setting up the clamp.
3. Use the included clamp and tighten the xxxx until you feel strong resistance.
4. Use the provided Allen screws and Allen key to secure the clamp to the surface.
Make sure to follow the instructions in the user manual and adjust the levers' hardness to your preference before attaching the throttle quadrant to your setup.
Add New Comment