User Manual Q&AAnswer
Feb 24, 2025 - 04:25 AM
To install the KEMLAN Cube Wood Fireplace, you have two options: the Meridian Base Installation or the Table Installation. Here are the steps for each installation method:
Meridian Base Installation:
1. Place the appliance on top of the meridian base, ensuring that the front and side edges align with the base.
2. Use the supplied bolts and washers to secure the appliance to the base.
3. Position the appliance and meridian base assembly in the desired location, making sure the flue hole is in the desired position.
4. Use the existing holes at the bottom of the meridian base to drill holes for M8-M10 Dyna bolts.
5. Use the preferred Dyna bolt size to affix the appliance and meridian base assembly to the floor.
6. Tighten both Dyna bolts to complete the installation.
Table Installation:
1. Place the back of the appliance on the back edge of the cube table, ensuring that the appliance is centered from left to right.
2. Remove the fan box and back assembly by moving them toward the top. Unplug any electrical connectors or wires.
3. Locate the holes in the appliance base as indicated.
4. Use tek screws to attach the appliance by using the pilot holes.
5. Use the supplied angle brackets and fix them to the bottom and back edge of the table using screws on both sides.
6. Finally, fix the whole assembly to the floor using M8-M10 Dyna bolts to complete the installation.
Please refer to the instruction manual for more detailed instructions and illustrations specific to your installation method.
Add New Comment