User Manual Q&AAnswer
Feb 24, 2025 - 04:23 AM
To install the ERICO 700 Offset Pipe Clamp, follow these steps:
1. Determine the desired location for the clamp on the wall or floor. Ensure that it is positioned to support the piping away from the surface.
2. Use appropriate fasteners (not included) to secure the clamp to the wall or floor. The clamp has holes for mounting.
3. Place the pipe inside the clamp, ensuring that it is centered and aligned properly.
4. Tighten the clamp using the provided hardware. The clamp has a bolt and nut for securing the pipe in place.
5. Verify that the pipe is securely held by the clamp and is properly supported away from the wall or floor.
Note: The maximum recommended load for each clamp size is indicated in the table provided in the user guide. Ensure that the load on the clamp does not exceed the recommended limit.
For more detailed instructions and illustrations, please refer to the ERICO 700 Offset Pipe Clamp User Guide.
Add New Comment