User Manual Q&AAnswer
Feb 24, 2025 - 04:14 AM
To fit the additional handle on the Einhell TC-ID 720-1 E Cordless Impact Drill, follow these steps:
1. Open the clamp on the additional handle by turning the handle anti-clockwise until it is wide enough to slide over the chuck.
2. Slide the additional handle over the chuck and onto the hammer drill.
3. Position the additional handle in the most comfortable working position for you.
4. Turn the handle clockwise to tighten the clamp and secure the additional handle.
5. The additional handle is suitable for both left-handed and right-handed users.
Please refer to Figure 2-3 in the instruction manual for a visual representation of the fitting process.
Add New Comment