Answer

Feb 24, 2025 - 04:08 AM
To connect the Eversole DAC-Z6 to your computer, you will need a USB-A to USB-B cable. Follow these steps:
1. Connect one end of the USB-B cable to the USB DAC input on the back of the DAC-Z6.
2. Connect the other end of the USB-B cable to a USB port on your computer.
3. Set the signal source on the DAC-Z6 to "USB DAC IN" using the control xxxx or remote control.
4. On your computer, install the necessary driver. For Windows, download and install the driver from the EVERSOLO official website. For Mac, no driver installation is required.
5. Once the driver is installed, go to the audio settings on your computer. In Windows, go to "Control Panel > Hardware and Sound > Sound > Playback" and select "EVERSOLE USB AUDIO" as the audio output device. In Mac, go to "System Preferences > Sound > Output" and select "EVERSOLE USB AUDIO" as the audio output device.
Now, your Eversole DAC-Z6 is connected to your computer and can be used as a sound card to decode audio signals.
Add New Comment