User Manual Q&AAnswer
Feb 24, 2025 - 03:56 AM
To assemble the SUN JOE SPX2005P-RM 13A Electric Pressure Washer, follow these steps:
1. Lay the unit on its side and press the wheels onto the unit until they lock into place.
2. Slide the handle into position from the front to the back, making sure the solid side of the handle faces the front of the washer. Secure the handle with the provided screws.
3. Slide the trigger gun holder and the hose/cord holder into position.
4. Fit the rear compartment into the back of the machine and secure it with the provided screws.
5. Fit the spray wand into the gun and twist it until it locks into place.
6. xxxx the end of the high-pressure hose clockwise into the trigger gun and tighten it securely.
7. Connect the other end of the high-pressure hose to the water outlet on the pressure washer.
8. Connect the garden hose adapter (female coupler) to the water inlet of the pressure washer and thread your garden hose (male end) into the adapter.
9. Plug the power cord into a working electrical outlet.
Please refer to the user manual for visual illustrations and additional information on assembly.
Add New Comment