User Manual Q&AAnswer
Feb 24, 2025 - 03:50 AM
To assemble and disassemble the baking plates on the DOMO DO9136C Snack Maker, please follow these steps:
1. Before assembling or disassembling anything, make sure to unplug the snack maker and wait until the appliance has cooled down completely.
2. Place the appliance on a flat and stable surface.
3. If necessary, clean the baking plates with a damp cloth.
4. To assemble the baking plates, follow these steps:
a. Place the 2 locking plates at the bottom of the top baking plate in the top slots of the hinges of the appliance. Make sure that the locking pin clicks into place in the hole at the top of the appliance. Push against the baking plate so that it locks into place.
b. Place the 2 locking plates at the top of the bottom baking plate in the bottom slots of the hinges of the appliance. Make sure that the locking pin clicks into place in the hole at the front of the appliance. Push on the baking plate so that it locks into place.
5. To remove the baking plates, press the buttons on the sides of the appliance. This will release the baking plates. To remove the top plate, press the left button. To remove the bottom plate, press the right button.
Please refer to the "ASSEMBLING AND DISASSEMBLING THE BAKING PLATES" section in the DOMO DO9136C Snack Maker Instruction Manual for visual illustrations and additional information.
Add New Comment