Answer

Feb 24, 2025 - 03:46 AM
To connect the SVEN E-701BT wireless stereo headphones to your device, follow these steps:
1. Remove both headphones from the charging case and put them back in to activate the headphones.
2. Make sure there is no protective film on the headphone contacts.
3. Ensure that the headphones and the charging case are fully charged before the first use.
4. Put the headphones back into the charging case and then take them out. Both earphones will automatically turn on and connect to each other. The LED indicator on the right earphone will alternate between blue and red.
5. On your device (such as a phone, notebook, or smartphone), enable Bluetooth device search mode.
6. Look for the message "SVEN E-701BT" or "SVEN E-702BT" on the screen of your device and select it to connect.
7. If the connection is successful, you will hear a short beep in the headphones, and the search mode indication on the headphones will stop. If no devices are connected, the headphones will automatically turn off after 2 minutes.
Note: Some devices may require you to enter a "0000" code to connect via Bluetooth. The availability of this feature depends on your phone.
For more detailed instructions and information, please refer to the User Manual provided with your SVEN E-701BT wireless stereo headphones.
Add New Comment