User Manual Q&AAnswer
Feb 24, 2025 - 03:44 AM
To program the remote control to operate your TV, please follow these steps:
1. Manually turn on the TV that you want to set up on the remote.
2. Press and hold the "TV" key on the remote control until the TV key blinks twice.
3. Press and release the "TV" key. The TV key will stay lit.
4. Find your TV brand from the chart provided in the manual and note the DIGIT key assigned to your brand.
5. Press and hold down the DIGIT key for your TV brand while pointing the remote at the TV.
6. Let go of the key when your TV turns off. This indicates that the setup for your TV is complete.
7. The remote control is now programmed to operate your TV.
If you need to program the remote control to other devices, please refer to the instructions provided in the manual.
Note: The manual also provides a "Code Method" for programming other devices such as VCR, DVD, AUD, or STB. You can follow the steps mentioned in the manual to program these devices as well.
Please refer to the complete installation guide for more detailed instructions and troubleshooting tips.
Add New Comment