How do I install the EGLO Rafaelino 1 Light Suspension Pendant? (EGLO Rafaelino 1 Light Suspension Pendant Instructions Manual)

Answer

manuals.plus

Feb 24, 2025 - 03:39 AM


To install the EGLO 205295A Rafaelino 1 Light Suspension Pendant, please follow the steps outlined in the manual:

1. Safety Precautions:
   - Before starting the installation, turn off the electrical power at the breaker panel.
   - This product must be installed by a person familiar with the construction and operation of the product and the hazards involved.

2. On/Off:
   - The on/off operation of the pendant light is controlled by the wall switch or dimmer switch connected to it. Please ensure the switch is in the "off" position during installation.

3. Installation:
   - Begin by removing the existing light fixture, if applicable, and disconnecting the electrical wires.
   - Carefully unpack the EGLO 205295A Rafaelino 1 Light Suspension Pendant and inspect it for any damage.
   - Follow the wiring instructions provided in the manual to connect the electrical wires of the pendant to the corresponding wires in the electrical box.
   - Securely mount the pendant to the ceiling using the included hardware and follow the specific instructions for your ceiling type (e.g., drywall, concrete, etc.).
   - Once the pendant is securely installed, restore the electrical power at the breaker panel.

Please note that the product may not look exactly as shown in the figures provided in the manual. If you encounter any difficulties during installation or have further questions, it is recommended to consult a professional electrician or contact EGLO customer support for assistance.