Answer

Feb 24, 2025 - 03:35 AM
Installation of the HILTI CFS-RCC Firestop Rectangular Cable Collar should be done in accordance with the provided installation instructions and any applicable national approvals. Here is a step-by-step guide on how to install the product:
1. Prepare the opening: Ensure that the opening in the wall or floor is clean and free from any debris or obstructions.
2. Position the collar: Place the HILTI CFS-RCC Firestop Rectangular Cable Collar around the cables or pipes that need to be firestopped. Make sure the collar is centered and properly aligned with the opening.
3. Secure the collar: Use the provided screws or other fastening methods to secure the collar in place. Follow the manufacturer's recommendations for the appropriate fastening method.
4. Seal the collar: Apply the recommended firestop sealant around the perimeter of the collar, ensuring that it completely fills any gaps between the collar and the opening. Use a suitable tool to smooth and shape the sealant for a proper seal.
5. Allow for curing: Follow the instructions provided with the firestop sealant to allow for proper curing time. This will ensure that the sealant forms a durable and effective barrier against fire and smoke.
Please note that the above instructions are a general guideline. It is important to refer to the specific installation instructions provided with the HILTI CFS-RCC Firestop Rectangular Cable Collar for detailed information and any specific requirements for your application. Additionally, always consult the product literature, 3rd party published listings, and national approvals for any additional information or guidelines related to the installation of this product.
Add New Comment