User Manual Q&AAnswer
Feb 24, 2025 - 03:33 AM
To connect and use the RUNZE FLUID USB-CAN-10 Serial Converter, please follow these steps:
1. Connect the USB-CAN-10 converter to your computer using a USB cable.
2. Make sure that the necessary drivers are installed on your computer. You can download the drivers from the official RUNZE website (www.runzeliuti.com) if they are not already installed.
3. Connect the CAN bus device or instrument that you want to communicate with to the converter using the appropriate cables.
4. Set the baud rate of the converter according to the requirements of your device. The USB-CAN-10 supports baud rates of 100K, 125K, 250K, 500K, and 1M.
5. If you need to supply external power to your device, such as for downloading a program to a single-chip microcomputer, you can connect a power supply to the converter. It can supply 5V and 200mA of current for external power.
6. Once everything is connected, you can use the converter for serial port debugging and communication testing with your device.
Please refer to the RUNZE FLUID USB-CAN-10 Serial Converter User Manual for more detailed instructions, including any specific software or configuration settings that may be required for your application.
Add New Comment