User Manual Q&AAnswer
Feb 24, 2025 - 03:28 AM
There are two options for attaching the Virtual Fly YOKO Flight sim to your desk or home cockpit setup.
Option A: Using a Clamp
1. Place the YOKO/YOKO+ on the surface where it will rest.
2. Secure the YOKO/YOKO+ to your desk by using the included clamp (C).
3. Tighten the clamp's xxxx (a) until you feel strong resistance.
Note: If your desk is thicker than 30mm (about 1.1 inches), it is recommended to use the "Extra Clamp" for the YOKO/YOKO+, which is sold separately on the Virtual Fly website.
Option B: Using Clamping Knobs
1. Set up your YOKO/YOKO+ in your custom home cockpit.
2. Use the included clamping knobs (D) to xxxx the YOKO/YOKO+ into your support base.
3. Make sure to have a cutout in your support base that matches the measurements depicted in the blueprint provided in the manual.
4. xxxx in the clamping knobs (D) securely.
For more detailed measurements and customized setups, you can download the blueprints from the provided link in the manual.
Please refer to the manual for visual diagrams and additional information on hardware setup.
Add New Comment