How do I charge the collar receiver for the SportDOG X-Series Brand Stubborn Dog Trainer? (sportDOGB X-Series Brand Stubborn Dog Trainer User Manual)

Answer

manuals.plus

Feb 24, 2025 - 03:05 AM


To charge the collar receiver, follow these steps based on the specific model:



1. For models SD-425X, SD-425XS, SD-425XCAMO, and SD-825X:

   - Lift the rubber cover protecting the Charging Jack.

   - Connect one of the charge connectors to the Charging Jack.

   - Plug the charger into a standard 120/240-volt AC wall outlet.

   - Charge the Collar Receiver for 2 hours during the first charge, and every charge thereafter. Remove the charge connector once charged and secure the rubber cover fully to ensure debris does not enter the Charging Jack.



2. For models SD-1225X, SD-1825X, and SD-1825XCAMO:

   - Align the Contact Points with the Charging Cradle, making sure the hole on the Charging Cradle aligns with the Receiver Indicator Light.

   - Push the Charging Cradle up and back on the Collar Receiver until the cradle snaps into place.

   - Plug the charge connector into the Charging Cradle.

   - Plug the charger into a standard 120/240-volt AC wall outlet.

   - Charge the Collar Receiver for 2 hours during the first charge, and every charge thereafter. Remove both the charge connector and Charging Cradle from the Collar Receiver once charged. The Charging Cradle is not intended to be attached when the Collar Receiver is in use.



Note: The Collar Receiver only requires a 2-hour charge using Li-Ion technology. It is not harmful to let the unit charge for more than 2 hours.



Please refer to the user manual for more detailed instructions and safety information.