User Manual Q&AAnswer
Feb 24, 2025 - 02:53 AM
To join shorter pieces of SloanLED SignBOX 3 Slim, you can use SignBOX 3 Clips (P/N 402106) and SignBOX 3 Couplers (P/N 402108). Here's how you can do it:
1. Cut the straps and wires between the modules to obtain the required length.
- Before cutting the wires, refer to the "Joining Product" section in the installation guide.
- Note that if the wires are not long enough for connections, you can use jumper wires or remove a module to maximize wire length.
2. Use SignBOX 3 Clips and SignBOX 3 Couplers to join the shorter pieces of the product to the required length.
- Insert the straps from both sides of the modules into the clips, ensuring that the track features are facing the same direction.
- Slide the clips onto the couplers and secure them with M4 (#8) tek screws.
- Connect the wires.
Tip: You can use pliers to help hold the parts during assembly.
Please refer to the installation guide for SignBOX 3 Slim Cabinet Lighting for more detailed instructions and illustrations.
Add New Comment