User Manual Q&AAnswer
Feb 24, 2025 - 02:44 AM
To install the , follow these steps:
1. Download and install the Vicor App on your Android or iOS device.
2. Sign in to the Vicor App and connect to Wi-Fi.
3. Add the camera to the app by following the prompts. Make sure the camera is close to the router during the configuration process.
4. Select a suitable spot for the camera where its view is not blocked and within the coverage of the Wi-Fi network.
5. Install the camera bracket using either the 3M adhesive tape or xxxx fixing method.
6. Insert the ball-type connection shaft into the rear of the camera.
7. Adjust the camera angle and tighten the base to fix the angle.
8. Power on/off the camera by long-pressing the power button for 2 seconds.
9. Configure the camera network using the Vicor App. Follow the instructions in the app to enter your Wi-Fi network name and password.
10. After successful configuration, set up the camera by adding a device in the app and scanning the generated QR code.
11. Once paired, you can use the camera for monitoring and recording.
For more detailed instructions, refer to the "Quick Start" section in the user manual provided with the product.
Add New Comment