User Manual Q&AAnswer
Feb 24, 2025 - 02:18 AM
To install the RHINO XC4PR/FL Kammbar on your vehicle, please follow the step-by-step instructions provided in the installation manual. Here is a complete guide on how to install the Kammbar:
1. Ensure that you have all the necessary parts and tools included in the package. These should be listed in the installation instructions.
2. Start by positioning the Kammbar on the roof of your vehicle. Make sure it is centered and aligned properly.
3. Locate the mounting brackets that came with the Kammbar. These brackets will attach the Kammbar to the roof of your vehicle.
4. Place the mounting brackets on the roof of your vehicle, aligning them with the pre-drilled holes or designated mounting points. Ensure that they are positioned symmetrically on both sides of the vehicle.
5. Use the provided screws and washers to secure the mounting brackets to the roof. Tighten them securely, but be careful not to overtighten and damage the roof.
6. Once the mounting brackets are securely attached, place the Kammbar onto the brackets. Ensure that it is properly seated and aligned.
7. Use the provided bolts and washers to fasten the Kammbar to the mounting brackets. Tighten them securely, but again, avoid overtightening.
8. Double-check the alignment and tightness of all the bolts and screws to ensure a secure installation.
9. After the Kammbar is installed, it is recommended to check the tightness of the bolts periodically, especially after driving on rough terrain or long distances.
If you encounter any difficulties during the installation process or have any further questions, please refer to the detailed installation instructions provided with the product. You can also contact Rhino Products Ltd directly for additional support through their contact information mentioned above.
Add New Comment