How do I install the RHINO TD2PR/FL KammBar on my vehicle? (RHINO TD2PR/FL KammBar Instructions Manual)

Answer

manuals.plus

Feb 24, 2025 - 02:12 AM


To install the RHINO TD2PR/FL KammBar on your vehicle, please follow these steps:

1. Ensure that you have all the necessary parts and tools mentioned in the manual.

2. Start by positioning the KammBar on the roof of your vehicle. Make sure it is centered and aligned with the roof rails or fixing points.

3. Attach the KammBar to the roof rails or fixing points using the provided brackets and bolts. The specific installation method may vary depending on your vehicle model, so refer to the manual for detailed instructions.

4. Tighten the bolts securely, but be careful not to overtighten and damage the roof rails or fixing points.

5. Once the KammBar is securely attached, check its alignment and adjust if necessary.

6. Repeat the installation process for the other side of the vehicle, ensuring that both KammBars are installed symmetrically.

7. After installing both KammBars, double-check the tightness of all bolts and brackets to ensure a secure fit.

8. Finally, test the stability of the KammBar by gently shaking it. If there is any excessive movement, recheck the installation and tighten any loose components.

For more detailed instructions and illustrations, please refer to the RHINO TD2PR/FL KammBar manual provided with the product. If you have any further questions or need assistance, you can contact Rhino Products Ltd directly through their website or email provided in the manual.