User Manual Q&AAnswer
Feb 24, 2025 - 02:09 AM
To install the RHINO TA4PR/FL KammBar on your vehicle, please follow the steps outlined in the installation manual provided with the product. Here is a complete step-by-step guide:
1. Start by gathering the necessary tools required for installation. These may include a tape measure, socket set, torque wrench, and a drill.
2. Ensure that the roof of your vehicle is clean and free from any dirt or debris. This will help ensure a secure fit.
3. Position the KammBar on the roof of your vehicle, ensuring that it is centered and aligned with the roof rails or fixing points.
4. Use a tape measure to ensure that the KammBar is positioned symmetrically on both sides of the vehicle.
5. Once the KammBar is in the desired position, mark the fixing points on the roof of your vehicle using a pencil or marker.
6. Carefully remove the KammBar from the roof and set it aside.
7. Using a drill, create pilot holes at the marked fixing points on the roof. Make sure the size of the pilot holes matches the size of the fixings provided with the KammBar.
8. Attach the KammBar to the roof of your vehicle using the provided fixings. Ensure that the fixings are tightened securely, but be careful not to overtighten them.
9. Repeat the process for the remaining fixing points, ensuring that the KammBar is level and secure.
10. Once all fixings are tightened, double-check the installation to ensure that the KammBar is securely attached to the roof of your vehicle.
11. Finally, test the stability of the KammBar by gently applying pressure to it. It should be firm and not move or wobble.
Please note that this is a general guide, and it is important to refer to the specific instructions provided in the installation manual for your RHINO TA4PR/FL KammBar. If you have any further questions or concerns, it is recommended to contact Rhino Products Ltd directly for assistance.
Add New Comment