User Manual Q&AAnswer
Feb 24, 2025 - 02:04 AM
To install the RHINO JD3PR/FL KammBar on your vehicle, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Start by ensuring that you have all the necessary parts and tools mentioned in the manual.
2. Clean the roof of your vehicle thoroughly to ensure a clean and secure installation surface.
3. Position the KammBar on the roof of your vehicle, making sure it is centered and aligned properly.
4. Locate the fixing points on your vehicle's roof. These are usually marked by small indentations or pre-drilled holes.
5. Attach the KammBar to the fixing points using the provided brackets and bolts. Make sure to tighten the bolts securely, but do not overtighten.
6. Repeat the process for all the fixing points, ensuring that the KammBar is securely attached to the roof.
7. Once all the brackets are securely fastened, check the alignment of the KammBar and make any necessary adjustments.
8. Finally, double-check all the bolts and brackets to ensure they are tightened properly and securely.
Please note that these instructions are a general guide, and it is important to refer to the specific instructions provided in the manual for your RHINO JD3PR/FL KammBar. If you have any further questions or concerns, it is recommended to contact Rhino Products Ltd directly for assistance.
Add New Comment