How do I install the RHINO GC2PR/FL KammBar on my vehicle? (RHINO GC2PR/FL KammBar Instructions Manual)

Answer

manuals.plus

Feb 24, 2025 - 02:02 AM

To install the RHINO GC2PR/FL KammBar on your vehicle, please follow the step-by-step instructions provided in the installation manual. Here is a complete guide to help you with the installation process:

1. Begin by ensuring that you have all the necessary parts and tools included in the package. The parts should be listed in the installation instructions.

2. Start by locating the mounting points on your vehicle's roof. These mounting points are typically found on the roof rails or fixed points of your vehicle. Refer to your vehicle's manual or consult with a professional if you are unsure about the location of the mounting points.

3. Place the KammBar onto the mounting points, aligning the mounting brackets with the holes on the KammBar. Make sure the KammBar is centered and positioned correctly on the roof.

4. Secure the KammBar to the mounting points using the provided bolts and washers. Tighten the bolts securely but do not overtighten, as this may damage the mounting points or the KammBar.

5. Repeat the process for the other side of the vehicle, ensuring that the KammBar is level and aligned properly.

6. Once both sides of the KammBar are securely attached to the mounting points, double-check the tightness of all the bolts to ensure a secure fit.

7. After the KammBar is installed, make sure to test its stability by gently pushing and pulling on it. If there is any movement or looseness, recheck the bolts and tighten them if necessary.

8. Finally, review the installation to ensure that everything is properly installed and secure. Check for any signs of damage or misalignment.

Please note that these instructions are a general guide, and it is essential to refer to the specific installation manual provided with the RHINO GC2PR/FL KammBar for accurate and detailed instructions tailored to your vehicle model. If you encounter any difficulties during the installation process, it is recommended to contact Rhino Products Ltd directly for further assistance.