User Manual Q&AAnswer
Feb 24, 2025 - 01:58 AM
To connect your speakers to the ART 390HVA1 Power Amplifier, you will need to use the Euroblock connectors located on the rear panel of the amplifier. Here are the steps to follow:
1. Identify the Euroblock input and output connectors on the rear panel of the amplifier.
2. For each channel, use a Euroblock connector to connect the positive (+) terminal of your speaker to the corresponding CH A thru D + terminal on the amplifier. If you are using a balanced signal input, connect the positive terminal of your speaker to the balanced signal input (+) terminal. If you are using an unbalanced signal input, connect the positive terminal of your speaker to the unbalanced signal input terminal.
3. Connect the negative (-) terminal of your speaker to the corresponding CH A thru D - terminal on the amplifier. If you are using a balanced signal input, connect the negative terminal of your speaker to the balanced signal input (-) terminal. If you are using an unbalanced signal input, you can leave the negative terminal of your speaker unconnected.
4. Repeat steps 2 and 3 for each channel and speaker you want to connect to the amplifier.
5. Ensure that the connections are secure and tight.
6. Once the speakers are connected, you can adjust the volume level using the Level controls on the front panel of the .
Please refer to the "Rear Panel" section of the owner's manual for visual references and additional information on the Euroblock connectors and their functions.
Add New Comment