User Manual Q&AAnswer
Feb 24, 2025 - 01:57 AM
To pair the DIGITALas Di-K2F TTLock Smart Touch Coded Keypad with the app, follow these steps:
1. Tap the panel of the keypad to light it up and activate the lock.
2. On the voice prompt "Please add Bluetooth Administrator," activate the app on your smartphone.
3. Tap the "δΈ‰" icon on the upper left corner of the app.
4. Tap "+Add Lock" and select "Door Lock" from the options.
5. On the app, you will see a list of devices available for pairing. Tap on the device shown on the screen.
6. Wait a few seconds until the lock gives a voice prompt or a long beep, which indicates that it has been successfully added to the app.
If the pairing process fails, you can try the following steps:
1. Shut off the app and Bluetooth on your smartphone.
2. Turn on the app and Bluetooth again.
3. Repeat the above pairing process.
Please note that the provided instructions are based on the information available in the user manual for the DIGITALas Di-K2F TTLock Smart Touch Coded Keypad.
Add New Comment