User Manual Q&AAnswer
Feb 24, 2025 - 01:49 AM
To connect and use the Ethereal HDM-EDIDB3 HDMI Edid Blocker with your surveillance NVR/DVR and multiple displays, please follow these steps:
1. Ensure that the HDM-EDIDB3 is compatible with your surveillance NVR/DVR. It is specifically designed for use with surveillance systems and cannot be used with any other A/V sources.
2. Connect one end of an HDMI cable to the HDMI output port of your surveillance NVR/DVR.
3. Connect the other end of the HDMI cable to the HDMI input port of the HDM-EDIDB3.
4. Connect HDMI cables from the HDMI output ports of the HDM-EDIDB3 to the HDMI input ports of your displays.
5. Power on your surveillance NVR/DVR, displays, and the HDM-EDIDB3.
6. The HDM-EDIDB3 is a plug-and-go device, so it should start working automatically. It will eliminate any EDID information that may cause issues and prevent the image from displaying on your connected displays.
7. Ensure that all audio and video signals are being transmitted properly from your surveillance NVR/DVR to the displays through the HDM-EDIDB3.
Note: The HDM-EDIDB3 is designed to provide a small form factor and high-value solution for video security integrators. It helps in situations where EDID information can lock systems and splitters up, causing display issues. However, please refer to the user guide or contact the manufacturer's support for any specific troubleshooting or advanced usage instructions.
For more information or assistance, you can visit the manufacturer's website at www.MetraAV.com or contact their customer support at 386-255-0234.
Add New Comment