User Manual Q&AAnswer
Feb 24, 2025 - 01:18 AM
Installation of the K-VIT MIR006N LED Mirror is a relatively simple process. Please follow the steps below:
1. Gather the necessary tools and materials: You will need a screwdriver, level, measuring tape, and wall anchors (if required).
2. Choose the installation location: Select a suitable location on the wall where you want to mount the LED mirror. Ensure that there is an electrical outlet nearby for power supply.
3. Mark the mounting points: Hold the mirror against the wall at the desired height and mark the positions of the mounting holes on the wall using a pencil or marker.
4. Install wall anchors (if required): If the mounting holes do not align with studs or if your wall is not made of solid material, you may need to use wall anchors. Drill holes at the marked positions and insert the wall anchors.
5. Mount the mirror: Align the mounting holes on the back of the mirror with the marked positions on the wall. Insert screws through the holes and tighten them securely. Ensure that the mirror is level using a level tool.
6. Connect the power: Plug the power cord of the LED mirror into a nearby electrical outlet. Make sure the power switch is in the off position before plugging it in.
7. Test the mirror: Turn on the power switch and check if the LED lights on the mirror are functioning properly. If everything is working as expected, you have successfully installed the K-VIT MIR006N LED Mirror.
Remember to follow the safety precautions mentioned in the product manual to ensure safe and proper usage of the LED mirror.
Add New Comment