User Manual Q&AAnswer
Feb 24, 2025 - 01:07 AM
To charge the Maxcare MAX Pro 2.0 HOT COLD Therapy device, follow these steps:
1. Remove the adaptor cover at the bottom of the charging base.
2. Insert the 9V adaptor into the hole of the adaptor compartment.
3. Put back the adaptor cover and push the clip of the cover to the front to lock it.
4. The adaptor jack will be fixed firmly on the charging base.
5. Insert the adaptor AC cable plug into a wall outlet.
6. Place the Massager Device on the charging base for charging.
7. The charging indicating light on the Massage Device will start blinking in red.
8. The charging indicating light will turn blue when the device is fully charged. (Note: The device cannot be used during charging)
9. Charge the device for 3-4 hours for a full charge.
10. The device can be used continuously for approximately 90 minutes after a full charge.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment