User Manual Q&AAnswer
Feb 24, 2025 - 12:59 AM
The Hama 00 121703 Active DVB-T2 Indoor Antenna can be powered in three different ways:
1. Powering the antenna using the antenna cable:
- Connect the coaxial cable of the antenna to the antenna input on your digital TV or set-top box.
- Switch on the antenna using the on/off switch located on the antenna.
- Switch on your digital TV (and set-top box, if applicable).
2. Powering the antenna directly using the USB port of the digital TV / set-top box:
- Connect the coaxial cable of the antenna to your digital TV or set-top box.
- Connect the USB cable to an unused USB port on your TV or set-top box.
- Switch on the antenna using the on/off switch located on the antenna.
- Ensure that your set-top box or digital TV is switched on.
3. Powering the antenna using an external power supply unit:
- Connect the coaxial cable of the antenna to the antenna input on your digital TV or set-top box.
- Connect the USB cable to the antenna and to a suitable USB power supply unit (not included) and plug the latter into a socket.
- Switch on the antenna using the on/off switch located on the antenna.
- Switch on your digital TV (and set-top box, if applicable).
Note: When powering the antenna directly from the set-top box or digital TV, make sure that the supply voltage of 5V is provided by the device. Adjust any necessary settings in the menu.
For more detailed information and instructions, please refer to the "Getting started and operation" section of the .
Add New Comment