User Manual Q&AAnswer
Feb 24, 2025 - 12:57 AM
To connect the auna SC1 Audio Clock to your digital audio device, you will need a BNC cable (75Ω). Follow these steps:
1. Locate the clock input on your digital audio device.
2. Connect one end of the BNC cable to the clock output port (S9c) on the auna SC1 Audio Clock.
3. Connect the other end of the BNC cable to the clock input port on your digital audio device.
4. Once the cable is securely connected, enable the clock input on your digital audio device according to its user manual.
Please note that the specific instructions for enabling the clock input on your digital audio device may vary. Refer to the user manual of your device for detailed instructions on how to enable clock input.
If you have any further questions or need additional assistance, please refer to the auna SC1 Audio Clock user manual or contact auna customer support.
Add New Comment