User Manual Q&AAnswer
Feb 24, 2025 - 12:20 AM
To connect the AUDAC WP205 or WP210 to a loudspeaker system, you will need to follow these steps:
1. Install the wall panel on the desired location using the optional WB45S/FS (for solid walls) or WB45S/FG (for hollow walls) installation boxes.
2. Provide a twisted pair cable (CAT5E or better) from the receiving device to the wall panel.
3. Connect the 8-pin terminal block on the rear side of the WP205 or WP210 to a receiving device with a twisted pair cable.
4. Plug in the connectors of the twisted pair cable.
5. Plug in the mains power on the loudspeaker side.
6. Your system is now ready for operation.
You can now plug in your line and microphone audio sources to the wall panel, and the sounds should be audible through the loudspeaker system.
For more detailed information and illustrations, please refer to the "Quick start guide" section in the user manual provided by AUDAC.
Add New Comment