Answer

Feb 24, 2025 - 12:14 AM
To reset the TP-Link VIGI Wi-Fi Network Camera to its factory settings, follow these steps:
1. Rotate the sphere and unfasten the two fixed screws to remove the cover of the camera.
2. Locate the reset button on the camera.
3. Long press the reset button until the Status LED starts blinking red quickly.
4. Release the reset button.
5. Wait for the camera to reset to its factory settings. This may take a few moments.
6. Once the camera has reset, you can set it up again using the TP-Link VIGI app or other management methods mentioned in the user guide.
Note: Resetting the camera will erase all previous settings and configurations. Make sure to back up any important data or settings before performing a reset.
Add New Comment