User Manual Q&AAnswer
Feb 24, 2025 - 12:10 AM
Cleaning the Galaxy 177IMBL7 Immersion Blender is an important step to ensure its proper functioning and hygiene. Here is the recommended cleaning procedure:
1. Unplug the immersion blender before cleaning to ensure safety.
2. Detach the shaft from the motor unit and set it aside.
3. Use a damp sponge or cloth to wipe the exterior of the motor unit. Be careful not to get moisture inside the air vent holes on the side.
4. Rinse the shaft under the tap.
5. Remove the bell from the shaft.
6. Remove the blades from the bell. Use an oven glove or thick cloth to grip the blades.
7. Use a detergent or disinfectant suitable for cleaning plastic parts (avoid detergents that are too alkaline). Dilute the cleaning agent as per the manufacturer's instructions.
8. Gently scrub each component, including the shaft, bell, and blades, with the cleaning solution.
9. Rinse all parts thoroughly with water to remove any residue.
10. Allow all the components to dry completely before reassembly.
Important Precautions:
- Always unplug the immersion blender before cleaning it.
- Avoid immersing the motor unit or its handle in water. These parts should only be wiped with a damp cloth.
- Check that your detergent is suitable for cleaning plastic parts. Some washing agents with high levels of caustic soda or ammonia can damage certain types of plastic.
- After using the immersion blender in a hot preparation, cool the bottom of the foot in cold water before dismantling.
By following these cleaning instructions and precautions, you can maintain the cleanliness and longevity of your Galaxy 177IMBL7 Immersion Blender.
Add New Comment