User Manual Q&AAnswer
Feb 24, 2025 - 12:03 AM
To pair the Bumpster OR2302 wireless speaker with your smartphone, follow these steps:
1. Move the slide switch on the bottom of the speaker to the [BT] position.
2. The speaker will power on within 3 seconds, indicated by a blue LED on the front.
3. The LED will blink quickly to show that it is ready for pairing.
4. Access the wireless settings on your smartphone and select "OrigAudio-D" to pair.
5. You will hear a beep from the speaker and see the blue LED flash steadily (1.5 times every second), confirming that a connection has been made.
If you need to pair the Bumpster to a new smartphone, first disable the wireless pairing functionality on your original smartphone and then enable wireless pairing on the new smartphone. Switch the speaker from [OFF] to [BT], and repeat the pairing instructions mentioned above.
Note: For more detailed instructions, please refer to the "Wireless Pairing" section in the Bumpster OR2302 Wireless Speaker Instruction Manual.
Add New Comment