User Manual Q&AAnswer
Feb 23, 2025 - 11:57 PM
To set the DMX address for the AUDIBAX Waco Profile 200, follow these steps:
1. Press the MENU button to enter the Main Menu interface.
2. Use the UP or DOWN button to select the DMX menu and press ENTER.
3. In the DMX menu, select the Mode sub-menu.
4. Choose the desired DMX address mode (1/2/3 channels).
5. Set the DMX address by rotating the rotary xxxx or using the UP and DOWN buttons.
6. Press ENTER to confirm the DMX address setting.
Note: The DMX address determines which channel the fixture will listen to for control signals. Make sure to set the DMX address correctly to ensure the fixture responds to the correct control signals.
For more detailed instructions and information, please refer to the AUDIBAX Waco Profile 200 User Manual.
Add New Comment