User Manual Q&AAnswer
Feb 23, 2025 - 11:54 PM
To install the battery pack for the blinds 2go SmartView Electric Roman Blinds, follow these steps:
1. Before starting the installation, it is recommended to charge the battery pack fully using the charger plug included. The LED on the charger plug will turn green when the battery pack is fully charged.
2. If you have ordered the blinds as a 'recess fitting', use the 'hook' brackets from the fittings kit to hang the battery pack onto the back of the blind's headrail.
3. If you have ordered the blinds as an 'exact fitting' and there is not enough space behind the headrail to hang the battery pack, you can fix it to another surface using the 'clip' brackets provided. The clip brackets can be either top-fixed or face-fixed.
4. To install the brackets, you have two options:
- Top-Fixing: Use the single hole in the top of the bracket to fix it to the lintel (the 'ceiling' of the recess).
- Face-Fixing: Use two screws through the back plate to mount it onto a facing surface such as a wall or window frame.
5. Ensure that the position of the outermost brackets is at least 5cm away from the ends of the rail, and any other brackets are evenly distributed across the width.
6. Once the brackets are installed, you can proceed to fit the blind:
- Situate the front lip of the headrail into the front of the bracket.
- Push the back of the headrail upwards to lock it into the back of the bracket.
7. To release the blind from the brackets, push firmly against the blind's headrail, and while still pushing against it, twist the back of the headrail downwards.
For further assistance or detailed instructions, you can refer to the blinds 2go SmartView Electric Roman Blinds Installation Guide provided with the product.
Add New Comment