Answer

Feb 23, 2025 - 11:48 PM
To connect devices to your Element EP400AB55R TV, follow these steps:
1. Before mounting the TV, place it screen-down on a clean, flat, soft surface to prevent scratches or damage.
2. Locate the panel door on the back of the TV and remove the seven screws by hand to open the panel door.
3. Find the power cord inside the door and run the plug out to the bottom of the panel. Do not connect to power until all cable connections have been made.
4. Plug in your devices and ensure they are securely connected. The device cords should run flat out the bottom of the panel between the two bottom xxxx holes and not be layered.
5. Close the panel door and replace the seven screws tightly by hand, ensuring there are no large gaps between the foam and cords.
It is important to check that you have selected the right cables for the ports and that they are securely connected. Loose connections can affect picture and audio quality.
Please note that cables and external devices are not included with the TV.
Add New Comment