User Manual Q&AAnswer
Feb 23, 2025 - 11:39 PM
To install and use the Aputure F10 Fresnel with the LS600d Pro Light Storm Daylight LED Light, please follow these steps:
1. Ensure that the LS600d Pro Light is turned off and unplugged before attaching the F10 Fresnel.
2. Align the mounting bracket of the F10 Fresnel with the Bowens Mount on the front of the LS600d Pro Light.
3. Gently push the F10 Fresnel onto the Bowens Mount until it locks securely in place.
4. Once attached, you can adjust the beam angle of the F10 Fresnel by rotating the xxxx located on the side of the Fresnel. This allows you to control the spread of light from a narrow 15-degree beam to a wider 45-degree beam.
5. To remove the F10 Fresnel, simply reverse the installation process by gently pulling it off the Bowens Mount.
Note: The F10 Fresnel is also compatible with other brands with a Bowens Mount.
For more detailed instructions and information, please refer to the Aputure LS 600d Pro Light Storm Daylight LED Light Instruction Manual provided with your purchase.
Add New Comment